Here are the steps.
1. Immediately take the phone out of the water
While virtually sealed, water can easily seep into the phone in a very short time. Difference a few seconds can determine the life or death of your gadget.
Therefore, remove the phone from the water as soon as possible, then turn off to prevent short circuiting indirectly (short circuit). Do not turn it on before drying.
2. Do not try to take a cell phone submerged in water that is being in-charge and connect to the power jack
The reason, perhaps still burning and electricity can flow into the water in the vicinity of the phone. His intention to save the phone, rather than the soul itself may be threatened. Turn off the power first, then ask for professional help.
If the phone fell into the water while not being connected to a power outlet, please read the next step.
3. Phone immediately dry with a towel or cloth, then remove all the cover and the battery
This is one of the most important steps. Most of the electronic components inside the phone can survive even if exposed to water, as long as there is no power from the battery.
wikihow.com
To check the water damage, check around the corners of the battery in the area that there is a circle or a small white box, with or without the red line.
If the color is not white but changed to pink or red, meaning no damage from water seepage.
Read the manual quickly if it does not know how to remove the battery.
4. Remove the SIM card and memory card
The data and information stored in the SIM or memory card sometimes more important than the phone itself. Therefore, although the two components is relatively waterproof, you should immediately remove it to prevent things that are not desirable, such as corrosion of the contact parts are made of metal.
Then, immediately drain the SIM and memory card, do not put the phone before it is completely dry.
5. Disconnect all accessories like headphones and casings
Accessories can trap water so that complicates the process of drying. Immediately release all of them after the phone out of water.
6. Repeat business mobile dry with a towel
This time, try to be more thorough than the first attempt. Drain as much water from the outside and inside the phone (battery compartment) by wiping gently using a towel.
Do not move their phone to move the water in it was not thither. Strive to position the phone does not change while drying. Note the towel in order not to get caught in between the surface of the phone.
Clean the inside of the phone with alcohol can help remove water.
7. Use a vacuum cleaner (a vacuum cleaner)
To drain the water out of the phone, use a vacuum cleaner when there. Turn on and navigate to each section are wet for about 20 minutes. In order not to stiff, Take turns holding it with others. wikihow.com
This method can quickly drain the phone so it can be turned in the shortest possible time, just half an hour when the phone briefly dipped into the water.
Do not drive too close cleaner funnel to the phone because it produce static electricity, which is even more dangerous for phones than water though.
Do not use a hair dryer (hair dryer) or any objects that are winds to dry the phone, even though set to "cool". Such tools can push more water and moisture deep into the phone so that potentially exacerbate the damage.
8. Use water-absorbent material to dry the phone
Examples are widely available is rice. Enter the phone into the rice and leave overnight or more lama.wikihow.com
More effective material is silica gel or other moisture absorbent. Enter the phone with silica gel in a sealed container.
To be effective, turn the phone's position every few hours so that the water trapped inside can flow out through the bottom.
9. Remove the phone, then put it on a towel, handkerchief, or other cloth.
If it turns out there is still moisture in the towel or handkerchief, repeat the drying with a vacuum cleaner and next steps.
10. Try to turn on the phone
Once the maximum effort and wait for at least 24 hours, it is time try turning on the phone.
Check first to make sure every part of the phone that the device in question is completely dry. Then, plug the battery into the posnel, turn on, and see if the phone is functioning normally.
If the phone is completely dry but will not turn on, try to connect to the charger. If the phone can be lit this way, the battery is probably defective and should be replaced.
11. If you still can not turn on, bring it to a location service professionals
Do not attempt to disassemble the phone itself without the help of professionals. You are potentially exposed to hazardous chemicals from your phone or electric shock.
If the phone turns on but does not function normally, there may have been a result of corrosion of water that remains. Disconnect all batteries and accessories, then try again and wipe dry-contact metal box.
Post a Comment